Mighty+ Buyer's Checklist: Four Upgrades That Pay Off
In short: the Mighty+ accessories that pay off are a glass mouthpiece, a set of dosing capsules, a side bubbler for home sessions and a desktop stand. Add spare cooling-unit screens as a running cost. Each one targets something specific, that is taste, reload speed, vapour temperature or how tidy the device is on your desk. Skip any that do not fit how you actually use your Mighty+.
The Storz & Bickel Mighty+ is well equipped as standard. Storz & Bickel lists:
- a 40 to 210°C range, with two +15°C boost steps
- about a minute to reach 180°C
- a rated airflow of 10 litres per minute
- a ceramic-coated 1.4 cm³ chamber
- two lithium-ion cells, with USB-C supercharging to about 80% in 40 minutes using a 15 V / 3 A supercharger
- use while charging with a 15 V / 3 A supercharger
Accessories do not change the heater or battery. What they change is how the Mighty+ tastes, how quickly you reload and how cool a long session feels. This checklist covers the four upgrades worth paying for and links to our deeper guides on each.
Mighty plus accessories at a glance
| Upgrade | What it changes | Skip it if |
|---|---|---|
| 1. Glass mouthpiece | Glass at the lips, a little extra length | You carry the Mighty+ loose in a bag |
| 2. Dosing capsules | Quick reloads, a cleaner chamber | You rarely reload and do not mind brushing out the chamber |
| 3. Side bubbler | Cooler, water-filtered draws at home | You mostly use it out and about |
| 4. Desktop stand | Keeps it upright and tidy while charging | It lives in a bag, not on a desk |
1. A glass mouthpiece
The stock mouthpiece is plastic. A glass one pushes into the Mighty and Crafty cooling unit with silicone gaskets, putting glass where your lips touch. We make three styles, each supplied with two gaskets:
- Classic short: 35 mm. Compact and pocketable.
- Vortex spiral: 65 mm, with a spiral path.
- Long-Draw: 120 mm, the longest of the three, for a little extra cooling. Best used at home.
Expectation note: silicone grips less firmly than the original plastic fitting, so a glass mouthpiece can pull out if it is knocked. It can take a few sessions to get used to. We explain how the fit works in why Mighty glass mouthpieces can fall out. These mouthpieces fit the Mighty, Mighty+, Crafty and Crafty+ only, not the Venty or Veazy.
2. Dosing capsules
Storz & Bickel confirms the Mighty+ chamber is the same size as the Crafty+, Venty and Veazy chambers, and that capsules are compatible across all four. Capsules turn a reload into a swap and keep herb off the chamber walls. Choose from:
- Drop'n'Tip glass capsules: open, 14 × 8 mm, for home use
- Armour aluminium capsules: screw lid, for carrying loaded portions
Which type you need, and how many, is a topic of its own. Our Mighty+ dosing capsule guide covers it in full.
3. A side bubbler
Our Mighty and Crafty bubblers fit in place of the mouthpiece, with the water body sitting to the side. That keeps the water away from the device. All three come with two gaskets:
| Bubbler | Size and weight | Character |
|---|---|---|
| Cascade side bubbler | 170 × 120 mm, 100 g | The simple starting point |
| Steel Stream | 170 × 120 mm, 150 g | Water plus steel cooling beads |
| Typhoon double barrel | 190 × 140 mm, 100 g | Two chambers, the biggest piece |
Expect the draw to feel different from a dry mouthpiece, and draw slowly so water stays in the bubbler. If you are torn between the two bigger options, read Double Barrel or Steel Stream XL. For first-time water users, our beginner's guide to Mighty bubblers covers filling and cleaning.
4. A desktop stand
If your Mighty+ lives on a desk or bedside table, our 3D-printed Mighty stand holds it upright. It measures about 10 × 4.5 × 2 cm and is made for the Mighty and Mighty+ only. It pairs well with pass-through use: with a 15 V / 3 A supercharger, Storz & Bickel says the Mighty+ can be used while plugged in, and the display shows "dct".
The running cost: cooling-unit screens
Screens are a running cost rather than an upgrade. Our pre-shaped coarse cooling-unit screens are 14 mm across and come in packs of 6, 12 or 24. They push straight in without trimming. For everything that wears out and when, see what wears out first on a Mighty+.
Three starter kits, by how you use it
| Owner | Start with | Add later |
|---|---|---|
| Out and about most days | Classic short glass mouthpiece and a pack of Armour capsules | Spare screens |
| Mostly at home, evening sessions | Long-Draw or Vortex mouthpiece and Drop'n'Tip glass capsules | Cascade side bubbler, then the stand |
| Desk-bound, often plugged in | Stand and Drop'n'Tip capsules | Steel Stream or Typhoon for longer sessions |
Whichever kit fits, keep the stock plastic mouthpiece. It is still the most secure fit for travel, and it means you have a backup while glass is soaking.
Accessories you can skip
- Generic "universal" glass. The Mighty cooling unit takes glass made for it. Buy pieces named for the Mighty or Crafty.
- Venty or Veazy mouthpieces and bubblers. Capsules and chamber screens are shared, but mouthpieces and bubblers are not.
- A bubbler, if you vape on the move. Water pieces are home kit. A short glass mouthpiece and a few capsules travel better.
Looking after your accessories
Storz & Bickel's guidance is to soak the cooling unit in 70% isopropyl alcohol for no more than 30 minutes, because longer soaks can harm plastic parts. For glass mouthpieces and bubblers, our listings recommend an isopropyl alcohol soak. Rinse them well and let them dry fully before refitting the gaskets. Our guide to cleaning glass accessories covers soaking and drying.
Frequently asked questions
Do original Mighty accessories fit the Mighty+?
Our mouthpieces, bubblers and screens are listed for the Mighty family. For capsules, Storz & Bickel's shared-chamber statement covers the Mighty+. The stand is made for both.
What should I buy first?
A glass mouthpiece if taste matters most, or capsules if you reload often. Leave water until you know you want it.
Browse the full range in our Mighty accessories collection.
